HOw to install push button Seafoam/Water/Meth injection?

[Spoolin4Ever]

I want to install a small system to inject my choice of liquid into the intake at the push of a button. Sometimes I might want to seafoam it, or keep water in it most of the time, either to clean valves/pistons, and also to cool.

What is a good, reliable system, what would I need?

So I don't want it to be boost dependant, I just want it manual, with the option of chaging it later to a more standard setup, but not mandatory.

I want to make my own, and not spend much.

 

[red_devil]

Water and meth will do what seafoam does while lowering intake temps.

 

[Spoolin4Ever]

Water and meth will do what seafoam does while lowering intake temps.

Alright...Well I am curious do these other systems use a push button or just boost controlled, both or what?

 

[420a-t]

Most are boost controlled, however you could wire it up to where it goes to a toggle switch or push button instead of the Hobbs switch.

 

[dsmfa9nutter]

It's called water/meth injection. There are hundreds of kits to pick from and they're fairly cheap for what they do.