Hid install help! Please!

[oasis1979]

Hey all!

So, I have a retrofitted headlight assembly. I had it built with E55 projectors, CCFL angel eyes, with the HID kit that came with the projectors. I had all the wiring setup including the relay harness that connects to the battery.

OK..so here's my program. Halos are good, but I can not get the lights to fire up. I was stuck for 4 hours trying to figure it out. I can take pictures if you'd like, but my main issue is (I think), on the driver side headlight, there are three connectors that are part of the new assembly. One connects to the OEM connector, other connects to the ballast, and there's another one, and that one I don't know where it goes. Oh, the ballast are DS2. Please, if you can help, let me know. Hit me up on here or email me direct at [email protected]. THANKS!

Oscar

 

[gofer]

Hey all!

So, I have a retrofitted headlight assembly. I had it built with E55 projectors, CCFL angel eyes, with the HID kit that came with the projectors. I had all the wiring setup including the relay harness that connects to the battery.

OK..so here's my program. Halos are good, but I can not get the lights to fire up. I was stuck for 4 hours trying to figure it out. I can take pictures if you'd like, but my main issue is (I think), on the driver side headlight, there are three connectors that are part of the new assembly. One connects to the OEM connector, other connects to the ballast, and there's another one, and that one I don't know where it goes. Oh, the ballast are DS2. Please, if you can help, let me know. Hit me up on here or email me direct at [email protected]. THANKS!

Oscar

You need to FLIP the connector that connects to the back of the HID itself, I know its keyed but for some reason its wired up backwards. Spin the connector and push it in (it may crack the connector a bit) then fire on the HID's...

 

[oasis1979]

Here's my headlight setup...I disconnected one of the ballast so it's not in the top picture.

You must be logged in to view this image or video.

Here's the ballast:

You must be logged in to view this image or video.

You must be logged in to view this image or video.