Help with DSMlink Logs Please

[95RedTsiAwd]

Hello Everyone

I know these should go in the Logs forum but I still can't post there. Moderators please feel free to move it there if you wish. (trying to follow all the rules)

I have 2 logs I would like looked at please.

I have a plx wideband so please be sure that is displayed. First one is a 3rd gear pull, second is my last trip to our local 1/4 strip. I have controller set for 19lbs, but I have a small boost leak. Will spike to 19, hold there for a sec or 2, then drop to 14 or so. I will do a leak check tomorrow.

All my mods are listed in my profile.

I had 750cc injectors but found one of them defective so I returned them. These logs are with 550cc inj.

I also have one more question. I understood the Global settings to compensate for the 550's but I didn't totally understand how to calculate the dead time, so that is still at 0. Any help with that would be greatly appreciated. Also all fuel and timing are still at stock settings except the global. It runs and idles just fine. Just seems kinda slow. The race log I ran a 14.2 at 94.7mph with a 1.87 60ft.

Thanks all so much for your time

Happy boosting

 

[JayRolla]

Ok everytime someone posts a dsm log and I try to open it, its all in code like this...........................ü AÈ Bô UHóÀ D³ EИ AØ C˜€ Bö @€ Bþ AÈ Bø UI1ÀD² EÒ AØ C™€ Bö @€ Bþ AÈ C UIoÀD± EÓh Aà Cš€ Bö @€ Bü AÈ Bþ UIp D°à EÖ° Aà C Bö @€ Bþ AÈ Bþ UI*# D®À EÛ€ Aà CŸ Bü @€ Bþ AÈ Bþ UI6Ð@D®à EÝ Aà C# C
@# Bü AÈ Bö UIC D® Eàð Aà C¢ C @à Bü AÈ Bè UIO0 D¬ Eá8 Aè C¡€ Bü AP Bü AÈ Bä UI[` D¬# Eç8 Aè C¦€ C
Aà Bü AÈ Bà UIg' D«à Eä Aà C¤ C Aø Bþ AÈ Bê UIt@D©` EèØ Aà C¦ C B Bþ AÈ BØ UIð@D¨à Eêð Aè C¨€ C B Bþ AÈ BÚ UI† D¨# Eê Aè C© C B Bþ AÈ BØ UIŒ( D§€ EïX Aè Cª C B Bþ AÈ Bô UI'@ D¥à Eòà Aè C«€ C
B Bþ AÈ Bä UI˜X D¦@ Eöx Aè Cª€ C B Bü AÈ Bà UIž'`D¤# E÷ Aè C#€ C B( Bþ AÈ BÒ UI¤ˆ D£€ Eûh Að C¯ C B Bþ AÈ BÔ UIª#ÀD¢# Eüè Að C¯ C B( Bþ AÈ BÒ UI°¸ D¡à Eüˆ Að C¯ C B$ Bþ AÈ BÖ UI¶Ð D#à F
 Að C± C B$ Bþ AÈ BÖ UI¼ÿ`D#à F@ Að C²€ C B Bü AÈ BÚ UIà DžÀ F# Aø Cµ€ C B Bþ AÈ BÞ UIÉ D€ F
Ä Aø C· C B$ Bþ AÈ BÖ UIÏ1ÀDž€ F
è Aø C· C B( Bü AÈ BÌ UIÕI`D&#339; F4 Aø C¸&#8364; C B, Bþ AÈ BÄ UIÛ`#D&#339; FÜ Aø C»&#8364; C B, Bü AÈ BÀ UIáx D&#8482;à F| Aø CÁ C B, Bü AÈ BÆ UIç D&#353;&#8364; F B CÅ C B0 Bü AÈ B¶ UIí¨ D&#732;# FÜ B CÈ&#8364; C B4 Bü AÈ B¦ UIóà D—à F%&#339; B CÍ C B4 Bþ AÈ B– UIùØ D–à F&ô B CÍ C B4 Bü AÈ B UIÿð D–&#8364; F, B CÐ&#8364; C B4 Bü AÈ B UJ D"à F. B C×&#8364; C B4 Bü AÈ B UJ D&#8226; F4ø B CÜ C B8 Bü AÈ B&#8224; UJ D"` F7 B CÞ C B8 Bü AÈ B&#8222; UJ(ðD'` F8T B Cà C B8 Bü AÈ B| UJ4 D' F8T B CÝ&#8364; C B8 Bü AÈ Bx UJ@ D F9$ B Cß&#8364; C B8 Bþ AÈ Bl UJL D` F:Ä B Cà C B8 Bü AÈ Bl UJcD# F<< B Cä&#8364; C B8 Bþ AÈ B| UJd Dà F>H B Cæ C B8 Bþ AÈ B| UJ|pD# FA&#710; B Cê C B4 Bü AÈ B‚ UJ!| D&#8249;À FCÐ B Cì C B4 Bþ AÈ B&#8224; UJ$&#710; D&#8249;À FIÔ B Cô C B4 Bþ AÈ B‚ UJ'" D&#8240;À FK&#710; B Có&#8364; C B4 Bþ AÈ B&#8222; UJ*# D&#8240;&#8364; FM B C÷&#8364; C B8 Bþ AÈ Bt UJ-#ðD&#8240;&#8364; FM&#8364; B C÷ C B8 Bþ AÈ B| UJ0¸D&#710; FQ@ B Cü C B8 Bþ AÈ B| UJ3Ì#D&#8224;@ FT B D &#8364; C B8 Bþ AÈ Bx UJ6Ð D&#8224;@ FSX B D @ C B8 Bþ AÈ Bt UJ9Ü D... FVÄ B D &#8364; C B8 Bþ AÈ Bt UJ<èD&#8222; FSÔ B D À C B8 Bþ AÈ Bp UJ?ÿD&#402;À FX" B D@ C B8 Bþ AÈ Bd UJCðDà F\X B DÀ C B4 Bþ AÈ Bx UJFpD‚# F[4 B D C B8 Bþ AÈ Bl UJI&pD&#8364;# FY4 B D C B8 Bþ AÈ Bl UJL*@D&#8364;# FY&#339; B D&#8364; C B8 Bþ AÈ Bp UJO0 D F]$ B D C B4 Bþ AÈ B‚ UJR< D} F^$ B D@ C B4 Bþ AÈ Bx UJUH D| FZp B DÀ C B4 Bþ AÈ B| UJXV0D{ F[| B DÀ C B4 Bþ AÈ Bp UJ[` Dy F^H B DÀ C B4 Bþ AÈ B&#8364; UJ^l°Dw@ F_H B D C B8 Bþ AÈ Bl

 

[ericbev]

Jay, you need to go to the DSM-Link website and download DSM-Link itself to read those logs. Its right there on their website.

http://www.dsmlink.com/downloads.html

 

[95RedTsiAwd]

I'm sorry, did I post these wrong Could someone please verify that I posted these correctly? If I need to I will try and repost them. Thanks so much

 

[Syndicate13]

You will not get the help you need on these forums. You need to post this on the Link forums, where people who use the link and more importantly the creators are there to help you.

 

[dave99gst]

Hello Everyone
I understood the Global settings to compensate for the 550's but I didn't totally understand how to calculate the dead time, so that is still at 0. Any help with that would be greatly appreciated.

Your answers are in the dsmlink user guide -

RC 550 global = -18% deadtime = 180

 

[95RedTsiAwd]

Thanks Dave, I bought the car with link already installed, but didn't come with the disks and I didn't realize the user manual was downloadable from the site. I plugged the number in, running even better than it was, and I now have the manual for future reference.

I appreciate your help

 

[No_Skillz]

How are your LTFT's with your adjusted DT and global? Shoot for them 0%s!