420A Help removing axle cup from transmission

[Zen Hakuren]

You must be logged in to view this image or video.

You must be logged in to view this image or video.

So... As u can see the joint in the axle got pulled apart...this was due to a ball joint failure.... Any ideas/tips on how to remove?

 

[jesse12345]

I usually get a short pry bar behind it if you use to long of one it puts to much pressure on the c clip, and won't pop out straight. I ended up destroying mine that way so I've had good luck with a short one.

 

[steve]

I usually wind up putting the pry bar in and kicking it. I've heard of people putting a wrench on the square shaft of a pry bar and twisting it.

 

[enriquez2000]

I had one get absolutely seized and used a vicegrip 5# slide hammer and popped right out

You must be logged in to view this image or video.