The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

going to AMS...

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.
mlopez said:
Dude, shut up and get out of here. You sound like an uneducated retard. The reason nobody knows about what your car needs is cause noone really wastes their time with NA DSMs. Those cars from AMS will smoke your ass.

Can I get an AMS sticker. :D


haha you should call eric tomorrow and ask him fro one just for the great post. :thumb:
 
i do all the mods on my car. every mod that is listed in my profile, i put on and i just got done putting in my engine and trans in. i just got tired of f*cking w/ my car. thats my im sending it out.


ill post later how everything went at ams. and how my car is doing w/ pics.
 
clipise said:
i do all the mods on my car. every mod that is listed in my profile, i put on and i just got done putting in my engine and trans in. i just got tired of f*cking w/ my car. thats my im sending it out.


ill post later how everything went at ams. and how my car is doing w/ pics.

you will be very happy with what you get. every time ive gone in there i got parts at a great price and the 3 things ive had them do to my car i was very pleased. all you have to do is go in there talk to eric like a normal human being instead of some of the kids that tell him (not ask) to beat an internet shop that only stays open for a good year. infact if you talk to him the right way, you wont even have to ask for a better price he usally will just take it off. but anyways have fun, Jim :dsm:
 
Thanks for all the nice comments from everyone. We really do appreciate it. stop by and I would be more then happy to toss out a sticker or two.


Greendsm, We use the 34MM door. I can understand your case on the door possibly being too big but we have seen Zero Ill effects from going with the larger door and the ported opening. If what you say is true about the door being pushed open then the turbo should spool later as a result of it. I can deffinetly tell you that spool time is never changed. No if someone were to install that door and put the improper tension on the arm and therefore the door I can deff. see a problem with that. However that roots to installation error not an incorrect part. I will pop in your thread later on today. Its nice to see an educated argument on here rather then a pissing match.

Eric
 
ok, here it is....im not going to get a the set up i was planning to get. come to find out my car was in worse shape then i thought.


my rear wheel bearing is bad and so is that caliper, one of my ball joint is bad along w/ my tie rod, my timing cover is ripped to shit, my oil return line is leaking oil, and my upper intercooler piping is messed up. i knew most of this already and didnt come much to a shock to me seeing that i bought this car 2 1/2 years ago not knowing i was buying a lemon. so here i am paying for my ignorance before. also, my compression is 120 across the board. :thumbdown

but the thing is, eric from AMS wasnt trying to bullshit me and wasnt trying to ripped me off. he actually gave me good advice about my car. its amazing how he was helping me out. i dont care what ppl say about their shop, these guys know their shit and know what they are doing. :thumb:

so heres what im going to do...im having them fix it and put a thermal cat-back on and their upper ic piping on my car and they are going to street tune it. then im going to save my money and build up a block. oh well, shit happens. :rolleyes:


at least ill be able to drive my car back and forth to work now. LOL.
 
we did a compression test not a leak down test.

thank you very much for the kind words john.

Eric
 
(In GOLDMEMBER voice) I LOOOOVE AMS. Everyone is so helpful, and rather than other shops like ULTIMATE(LY LAME) DRIVER, they have no problem answering any question you ask them. BY THE WAY, Don't ever go to Ultimate Driver, unless you own an SRT4 then take it there, so they can F it up, and if you own a SRT4 replace your shift knob with a DILDO, cause you're ### SRT4 IS NOT DSM, sorry, every SRT4 tries to race me and I just laugh, I especially love the '03 models without the LSD! WOOT WOOT one wheel wonder!!!!

Ultimate driver bought a 93 Auto Talon TSI, just so they can put a body kit on it, shave the door handles and put lights all around it...no engine work at all ::sniffs around:: Smell like rice to me.
 
SchifftyFive said:
Ultimate driver bought a 93 Auto Talon TSI, just so they can put a body kit on it, shave the door handles and put lights all around it...no engine work at all ::sniffs around:: Smell like rice to me.

God, that sounds so HAWT!!!!!!!! :thumbdown

I am the tech thats doing the work to Clipise's car. It definatly has some issues, but he's very determined to get it straightened out and I'll make sure I do everything I can do help him do so.
 
>we did a compression test not a leak down test.

thank you very much for the kind words john.

Eric<


no prob, but im only speaking the truth :p



>I am the tech thats doing the work to Clipise's car. It definatly has some issues, but he's very determined to get it straightened out and I'll make sure I do everything I can do help him do so.<


im so sorry to hear that. LOL, j/k. i know ur doing and good job and fast ass work. i couldnt believe when i talked to eric today how much u did. amazing. yea im very determined to get it in good condition where i can drive it again. also, my dad set a fire under my ass to make sure i can stop borrowing his truck.

i put money into a car that not even worth it. honestly eric(stampy) if i didnt need a car asap, i would of taken ur advice. :thumb:

hopefully, all that work ams is doing to my car, might get it tomarrow(friday).

my rear wheel bearing is bad and so is that caliper, one of my ball joint is bad along w/ my tie rod, my timing cover is ripped to shit, my oil return line is leaking oil, and my upper intercooler piping is messed up, evo3 turbo and ported 1g o2 housing, and street tuned.
all that in like 2 days. damn :thumb: :thumb: :thumb:
 
awh $hit i forgot you got the b!tch job at ams hello nother 10 sec car. :rolleyes: :cry: :D
 
volcom121 said:
awh $hit i forgot you got the b!tch job at ams hello nother 10 sec car. :rolleyes: :cry: :D

It's not a b!tch job, but he does drive a girly car
You must be logged in to view this image or video.
 
Mirage2LTurbo said:
It's not a b!tch job, but he does drive a girly car
You must be logged in to view this image or video.


constructive criticism = you the AMS bi***
 
Mirage2LTurbo said:
It's not a b!tch job, but he does drive a girly car
You must be logged in to view this image or video.

Girly car OMG I take offense to that statement aswell, seeing as we have the same body style. :cry: :cry: <--- look you made me cry...are you happy now?! :laugh: :p
 
volcom121 said:
awh $hit i forgot you got the b!tch job at ams hello nother 10 sec car. :rolleyes: :cry: :D


I think you are talking about Jim who also has a 2g, this is Micah who has a 2g also. I work up front in sales/marketing.
 
Mirage2LTurbo said:
It's not a b!tch job, but he does drive a girly car
You must be logged in to view this image or video.


LOL. You'd get rolled by this "girly" car though. :D
 
AMS97EclipseGSX said:
LOL. You'd get rolled by this "girly" car though. :D

Ahh how we will find out this season. Just remember, if you call me out, you come down here ;)
 
Mirage2LTurbo said:
Ahh how we will find out this season. Just remember, if you call me out, you come down here ;)


Don't worry I have every intention on making a trip down there for all you big par imports. I'm warning you, you are barking up the wrong tree though. How many spots do you want?? :laugh:
 
AMS97EclipseGSX said:
Don't worry I have every intention on making a trip down there for all you big par imports. I'm warning you, you are barking up the wrong tree though. How many spots do you want?? :laugh:

Unlike you Chi-Town boys, down here there are no spots or jumps to give to you, we go dead dig standing 1/4mile. If you wanna start racing 5 cars ahead of someone, I think there might be some competition up there for ya.
 
Mirage2LTurbo said:
Unlike you Chi-Town boys, down here there are no spots or jumps to give to you, we go dead dig standing 1/4mile. If you wanna start racing 5 cars ahead of someone, I think there might be some competition up there for ya.

No, I was asking you how many spots you want. I know you cant drive so to make up for that I was offering you spots. :laugh:
 
Status
Not open for further replies.
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G Mishimoto Radiator & Fan Shroud
    2G Mishimoto Radiator & Fan Shroud $200 + shipping and paypal feesYou must be registered to...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G Power Window Switches ( tested and hardware included )
    2G Power Window Switches $55 + shipping and paypal fees* Tested 6/2/26 * Hardware included *...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale Garage clean out
    Changing setups on the car and getting rid of some stuff as well that's been laying around. Will...
    • 92GSXtacy
    • Updated:
    • Expires
Back
Top