420A Getting it started

[Madmackin942]

Bound An awesome machine shop mcmurtry's just going to be step one of the build, have engine completely checked going to go ahead put that . 20 over bore on it any suggestions on doing anything with the crank? And would the stock crank B good for up 400 HP?

 

[BLACK'98DSM]

400 HP?

I'm guessing you want to go turbo?

 

[Madmackin942]

I'm guessing you want to go turbo?

At least have it ready but I'd have to drop the compression 8- 5 - 1

 

[Madmackin942]

I'm guessing you want to go turbo?

Have you heard anything about any aftermarket ECM plug in play

 

[silvreclips]

The stock crank is fine for over 400hp. Also there are no plug and play aftermarket ECUs available. Most people run megasquirt.

 

[BLACK'98DSM]

And you won't get 400hp without turbo. Not gonna happen. ECM is not enough for that.

 

[motomattx]

Link Ecu is a great option for an ecu.

 

[Madmackin942]

And you won't get 400hp without turbo. Not gonna happen. ECM is not enough for that.

I'm not going that high hp 300-325, enough that can handle it running stock crank but was actually wanting to get some top of the line Main and rod bearings