FAQ Article Requests - post them here

[Ludachris]

If you have an article you'd like to see written up in our Tech Article section:
http://www.dsmtuners.com/tech.php

Please reply to this post and request it. Make sure you've already looked through the articles section thoroughly to make sure you're not requesting an article that is already posted. No discussions here please - just requests.

 

[Lordpaxin]

How about a DIY blow though upper intercooler pipe.

 

[superdaddy]

yeah i was just wondering if you could post some tech articles on how to rewire your fuel pump in a turbo 1g awd

 

[Jeremoose]

This may sound stupid, but some of us noobs may not know what you're all referring to with the shortened versions of such things as Front Mount Intercooler (FMIC) etc... So i was wondering if somebody could do up a "Tuning Dictionary".... A "Tunecionary"!!! Thanks a lot!

 

[Hammer_Gaidin]

Hi, I'm in the middle of trying to put a 1g intake mani on my 2g, I just thought that a tech ariticle on this could be helpful.
Thanks

 

[codered]

If you have an article you'd like to see written up in our Tech Article section:
http://www.dsmtuners.com/tech.php

Please reply to this post and request it. Make sure you've already looked through the articles section thoroughly to make sure you're not requesting an article that is already posted. No discussions here please - just requests.

Would like to see a how to: replace awd tsi/gsx wheel bearing replacement

 

[rodwa4]

if someone could tell me how to get rid of an oxidizing clear coat that would be great!

 

[RairAir]

I would like to see an artice on how to shave your eagle emblem on the front bumber

 

[baxsom]

I would like to see an article on how to install a MSD DIS2 ignition on a 2gnt to include installing the stutter controls, dip switches etc.
i found a few online in other sites but most were confusing

thanks

 

[mazenb9981]

I am in need of an article on how to change the exterior color for a car. And all what you need from equipments, material, and preperations.

 

[redmayns]

i'd like to see how to install a boost control for a 2g DSM

 

[LilGdsm]

I just created this post, fix for the slave cyclinder rod on ACT2600

http://dsmtuners.com/forums/showthread.php?t=152430

 

[swarm]

Sanding/Painting Wheels.

 

[fastplant]

Not sure if this has been suggested, but for us 4G64 guys, maybe and article on how to properly attached an intake. Those of us who've done it konw that once you remove the airbox, the piping kind of just hangs. Zipties are the only solution I've seen other than custom fabrication that can be costly. Thanks.

 

[Royalty]

i did a post that shows how to run piping (UICP AND LICP ) for side to side intercoolers. I think this would make a great tech article.

 

[snoozin]

finish out the newbie tech article for fuel tuning. I dont have the stuff yet but in a year, year and a half i plan on having the s-afc, logger, and 650cc w/ new pump and i know very little about fuel tuning and what all the info on the logger means. a basic crash course would be great.

 

[realybigspoiler]

I would like to see the model numbers for the automatic transmissions through the generations. I remember seeing it once, but that may have been on DSMtalk. Just interested because mine starts with a K instead of an F and I was wondering what the F equivalent was.

 

[Eclipse45150]

Ok, I want to start getting the parts to turn my N/T with the 420A into a turbo. My friend has a stock turbo from 4g63 in good condition but does anyone know if that will bolt onto the 420? Also, can someone help me figure out what parts I will need. I know the turbo, manifold, downpipe, oil lines, timer, and fmic. ANything else? and knw of any good prices? Please help me!

 

[jesepes]

I'm rebuilding my rearend and would like to see an article with some specs and things to watch for etc. Including how to bench check the VC outside of the diff and carrier.

 

[yup talon]

as simple as it may be... im sure some would appreciate a tech article on how to change brake pads. pictures are always good.

theres no article on vfaq.com either.

 

[funniegus]

Some one should make video faqs and load em up online!

 

[blue1]

I was just given a 4gXX head is there any ways of distinguishing what heads are what? Could someone who knows put up casting no's or pic's to give an easy reference to tell all the 4G hardware apart!

 

[dsm-onster]

i don't want to pay $200. i want to pay like $50

 

[phastalon]

Hows it done whats best to use to tune it ? Aem or reprogram an ecu?
What size of injectors are needed ?Fuel delivery system? Drive train requirements.....etc
I'd like to build 1 and I want to know from some 1 who has before I blow all my cash on stuff I dont need .

I second this. I'd love to see pics of the rebuilding process and the steps taken to build a stroker motor.

 

[Agent11br]

How about a DIY blow though upper intercooler pipe.

that would be pretty sweet...cant be that hard, but ideas are always nice to have

 

[bigmandsm]

http://p066.ezboard.com/fdsmtalkctfrm12