evo mas with evo injectors

[dboyle23]

I am having trouble tuning with ecuflash for my car. I was wondering, can I just toss in an evo mas and evo injectors and just change the fuel map to what I want it to? Or is there alot more tuning involved?

 

[92AWDHX40]

I would at least get a logger, i dont know much a bout ecuflash.

 

[dboyle23]

I have evoscan and a UEGO

 

[frankenstein406]

Pretty sure you need 750s for it to idle close unless that's only on 1gs.

 

[Absit]

No you can't just toss in Evo injectors and MAF, you'd have to set your maps up to reflect that.
You're a "Proven" member, you should post in the tuning forum for this crap.
What trouble are you having?
Where's your log?

This thread is full of fail, come on guys.

 

[dboyle23]

I figured this area would get more responses since every time I post in the tuning forum I get one response and nothing else.

I have no problem setting maps.

 

[DSMunknown]

Back in '09 I personally installed an EVO MAS and EVO injectors with an EVO fuel pump and just ran it. For me it held rock solid without any issues whatsoever. I did have my PocketLOGGER in place for logging but that was about it. This was also on a 14B and I cranked the boost up to the low 20PSI range.

It was fun, easy, and cheap for me. But every car is different, so don't automatically think every DSM will react the same way just because mine did fine.

 

[dboyle23]

I can't get my fuel latency dialed in on ECUFlash. So I just thought with the injectors and MAS I could get pretty close, and then fine tune accordingly.

 

[Absit]

Unless your current MAF is bad, switching to an Evo MAF and Evo MAF table won't make anything easier or solve any problems.

You still haven't posted a lot or ROM, and the mods still haven't moved this to the appropriate forum even though it's been reported.

Excellent work all around.