ets street intercooler kit on car with ABS

[robbo185]

Will this kit fit a car with ABS? All the photos ive seen does not show one car with abs and I dont want to remove mine.

Can anyone running this kit or has any info chime in on this?

 

[Steve93Talon]

I used to run a Buschur FMIC with ABS, it was tight but it fit. I used a hump connector on the TB elbow to allow the upper pipe to clear the ABS unit. I've never seen an ETS kit on an ABS car but I'd imagine it's possible with a little tweaking.

You must be logged in to view this image or video.

 

[Avionixx]

It fits comfortably. It's a little tight if you plan on running a GM MAF, but even then you can get it to fit nicely by manipulating the couplers a little bit.

Not the best picture, but better than nothing:

You must be logged in to view this image or video.

 

[Rob10_99]

Thats exactly how mine fits in the 1st picture, besides being steel, there's nothing wrong with their kits,
check your pMs!

 

[xxShaneOmac]

All my pipes off my ETS kit are SS!
Money money