EPROM selectable rev limiter

[jazzyjay]

I have a Keydiver Stage 3 chip The chip work fine but some how I changed the Rev limit to 6500 instead of the 8250. I see the direction on how to change the RPM stutter box. If you have a link PLS post it

 

[Module Unknown]

Well I don't know if it's any different on a 1G, but on my 2G, with the key in the ignition and in the on position (car not running), if press down on the throttle and let go, the needle on the stock boost guage will move to one of four different positions. Each position corresponds to a set rpm limit. Press the throttle again until you get to the point you want then start the car. I've inadvertently changed that setting a number of times, probably by hitting the pedal while sitting in the car listening to the radio or something dumb like that.

 

[tstkl]

that is f*cking sweet

 

[steve]

Since most of this originated from the TMO chips.
http://www.technomotive.com/prod/eprom/selection.htm

If your selection setting isn't working the first place to check is the IPS operation.

Steve

 

[pneumo]

I have a Keydiver Stage 3 chip...some how I changed the Rev limit to 6500 instead of the 8250.

How did you wire the clutch switch for the NLTS feature? If it's wired wrong the ECU will think the clutch is down all the time and will giving you the NLTS rev limit.