engine assembly with pics?

[but]

I was wondering if anyone knows of a thread that shows engine assembly with pictures. I searched and could only find a good write up on dissassembly. thanks guys!

 

[DSM_PWR]

I have a pretty good semi-write up with pics on the bottom end
DSM_BOY Build

BlckNSpoolin has a good write up for the rest of the longblock parts
http://www.dsmtuners.com/forums/cyl...6707-project-rely-ability-6-bolt-rebuild.html

 

[snowborder714]

It might not be exactly the same, but I'd say start here and just read.
http://www.dsmtuners.com/forums/han...x-relocation-project-log-7.html#post151710853

 

[BogusSVO]

before you even start putting the egine together....

http://www.dsmtuners.com/forums/cylinder-head-short-block/362154-how-final-wash-engine-block.html

also wash the crank and gun brush out the oil passages in the crank...

 

[but]

Thanks guys!!!

 

[AndrewD5418]

I have a pretty good semi-write up with pics on the bottom end
DSM_BOY Build

BlckNSpoolin has a good write up for the rest of the longblock parts
http://www.dsmtuners.com/forums/cyl...6707-project-rely-ability-6-bolt-rebuild.html

I thought that the rings weren't supposed to be lined up with the wrist pins...
And plastigauge with assembly lube on?

 

[BogusSVO]

the rings are going to rotate in the bore once the engine runs...

and no.. no lube with plastagauge.. it willl skew the reading

 

[DSM_PWR]

I thought that the rings weren't supposed to be lined up with the wrist pins...
And plastigauge with assembly lube on?

The line up is what the Wiseco spec sheet had..

I did make that mistake in the pic, but i re-plastigaged it after i cleaned up the journals