DSM small 16g/evo 3 manifold/j pipe

[94'TSI'AWD]

DSM small 16g/evo 3 manifold/j pipe *pics added*


good deal for some decent power? If i do get this setup am i going to have to get some different injectors?
Any review and feedback is highly appreciated!!

 

[Gamble97]

Yes it's a good deal if it's $350 for everything and it doesn't smoke or burn oil.
Depending on your boost you may need bigger injectors. But with bigger injectors you needs a burned chip, ecmlink, or safc something to compensate for the larger injectors.

 

[kahl23]

I would ask how many miles are on it and ask to see a pic of the compressor blades, but if it is what it appears to be then yeah that's a good deal. Keep the boost low (<15psi or so) until you get some bigger injectors. If you have an automatic keep it really low, like wastegate pressure, as your injectors are even smaller than 5speeds. You will need bigger injectors to support this turbo, 550cc or 650cc would be plenty. Also, realize you will need to support those injectors with some sort of engine management. Read through the upgrade paths, those should give you a decent idea of where to start.

 

[toofast82]

Did you ask him if it included the O2 housing? I know it wasn't mentioned in the ad. Looks like a good deal. Get some pics of compressor wheel as mentioned. Exhaust wheel pic would give you a good idea if turbine seal is leaking as well.
Stock fuel system will be sufficient at stock boost level. Don't test your luck until you have the supporting mods and are knowledgable about what you are doing. Begin to look through the various "upgrade paths" on this site and many other of the dsm vendors(machv, rre,etc). Start research about tuning as well before you increase the boost.

 

[JusMX141]

Nice screen door air filter on that thing.

Look for compressor wheel damage as a result of incoming debris and small children.