Clutch situation

[j5productions]

Hey everyone. I've researched a lot about what clutch to get for my 420a . ( new to clutches and all)I can't find anything from what i have been reading except a lot of confusion. I will be modding down the road and was wondering, will this clutch here work for a stock 420a?
Eclipse Talon Laser Neon 420A Stage 1 Racing Clutch Kit | eBay
It has a 1900lbs pressure plate. Is that enough?
If not can someone give me any advice on what clutch and where to buy?
I think the 420a's have a modular type.

 

[gst96spyderman]

Gotta be careful about getting cheap parts from ebay. Usually, the rule of thumb is DONT. Extremepsi.com or stm are very reputable companies that sell quality parts and have great feedback with customers.

the kit shown has no name... That should be enough to throw up some flags. As far as this kit type to meet you desired goals, well, you should list goals, future mods, then an opinion can be made... Fyi, act 2100 & 2600 kits are pretty popular for up to and around 400 ft/lbs torque.

Do a kittle research, and there will be a devent amount of information out there. Heres a link to my.clutch and drivetrain list

http://www.dsmtuners.com/forums/drivetrain-tech/453208-clutch-replacment-checklist.html

 

[j5productions]

Alright, I'm sure mine is slipping, and no turbo but little mods . I'm mainly going to just throw headers testpipe and exhaust. I'm planning on selling the car in about a year and get a 4g63
So a oem could handle it?

 

[dsmcurse]

napa clutch will suit your needs just fine

 

[gst96spyderman]

Yes. If you plan on selling the car in the future, I woudn't put too much money in her. Good luck with your build

 

[j5productions]

Thank you guys

 

[j5productions]

One last noobish question, When i adjust my clutch, do i do it with just pedal freeplay? or do i have to go in to the master and adjust else where? this is for the 420a
it just feels as at a red light, i have to let the clutch all the way out except a inch or so before it engages.