1G Clutch pedal repair leftover hardware.

[silentsnow31802]

I just got done removing, repairing, and reinstalling my clutch pedal assembly.
I have 3 bolts left over and I dont remember where they went. They have 12mm heads.
They have red paint on them like the 8 others that held in the steering column.
Does anyone know where these could have gone?

Hardware I put back in....
4 bolts at the upper part of the column that bolts to the body.
4 bolts at the lower part of the column that bolts to a bracket that I had to remove.
3 bolts that bolt said bracket to the body.
5? nuts that bolt the brake master side of the pedal assembly on.
2 bolts that bolt the clutch master on.

What am I missing?

 

[92AWDHX40]

They could go anywhere if they were removed they have a home

 

[silentsnow31802]

They could go anywhere if they were removed they have a home

Yea that is my worry. Being I was in the steering/pedal area I assume they're pretty important. Can't for the life of me figure out where I removed them from though.