BSEK Install HELP!!

[drivensolo88]

ok, i have read the other posts on this and i know this isnt the right section for the post; but for some reason i cant post in any other sections except replys and nooby section.
ok so anyway on to my question. I have already droped the oil pan and removed the belts and removed the oil filter houseing, but for some reason i cant get the oil pump cover off. I have tried prying in different spots and i have taken out all the bolts. Should i have to remove the crankshaft sprocket, it is still on there but it didnt say in the VFAQ if i had to remove it or not? any help?? thanks.

 

[LTUDSM]

remove the crank sprocket,remove the crank sprocket plate.remove oil pick up tube,remove oil pump sprocket,all the timing components has to be removed,unbolt the oil cover bolts and just pry it off with the screwdriver

 

[grnchevyz]

The pump cover will be hard to pry if it has never been removed. Just use the pry spots indicated in the VFAQ and it'll come loose as long as you have all the bolts out. Mine was hard enough.

 

[drivensolo88]

Cool!! Thanks alot guys for the fast response, i am currently in my garage all greasy and was waiting for a reply . Thanks again!!

 

[LTUDSM]

any time,if you got any other questions pm me and ill try to help ya out,i got experience doing BSEK ,because i did 5 times already and know some trix ,of how to make things not complicated )

 

[drivensolo88]

cool man, yeah this is my first time . There is alot more to it then i originally thought . I read alot of threads and looked at the VFAQ alot, but it didnt look to hard. Then i got the timing belt and everything off and i was like dam there is alot of shit back here .

 

[Kastigir]

any time,if you got any other questions pm me and ill try to help ya out,i got experience doing BSEK ,because i did 5 times already and know some trix ,of how to make things not complicated )

I'll be doing one myself soon. I'll be sure to keep you in mind.

 

[drivensolo88]

UPDATE! Everything is off and i already put the oil filter housing togther with the eliminator kit, and also put the block off bearing in. Cleaned off all the old gaskets n such, so now i just have to go to advanced tomarrow and get all new gaskets and put all the shit back together . YAY

 

[LTUDSM]

congrats man, i hope everything goes right