Boost Gauge routing

[nightracer91]

I just purchased a boost gauge for my 1ga gst. I was going to mount it on the A-pillar, what would be the best way to route to tubing from the pillar to the TB?

 

[droppinbottom]

The easiest way to go is through the boot on the stering column

 

[Spooling99]

Tape the end of the line to a Coat hanger or something stiff, and route it through the column boot, have a friend grab it and hook it up. Make sure to not kink the line because it will cause the boost gauge to read wrong.
-Adam

 

[Gs Dewd]

The easiest way to go is through the boot on the stering column

Thats how I ran mine. to the left side of the steering boot. Just make sure you run out of the way of the pedals and sterring knuckle.