2G ATI super damper install

[Fl0r3s]

How would I go about doing this install, I bought my ATI a while ago but as I’m young and not too knowledgeable yet I haven’t installed it and I’m wondering if there’s anything custom I have to do like trimming the timing cover or longer belts and which belts should I use if I do?

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[bastarddsm]

Yes, you will need to trim the timing cover a lot. You will also need a damper installer tool. The damper hub is REQUIRED to be a press fit.

 

[Fl0r3s]

Yes, you will need to trim the timing cover a lot. You will also need a damper installer tool. The damper hub is REQUIRED to be a press fit.

Would it be easier to just get a Fluidampr?

 

[bastarddsm]

Would it be easier to just get a Fluidampr?

Still need to trim the cover, and the stock pulleys break on occasion if you are hard on stuff.

 

[Fl0r3s]

Still need to trim the cover, and the stock pulleys break on occasion if you are hard on stuff.

My pulley did go out on its own so I’ve been sitting on this decision for a while, would I still need to time it to change to the fluidampr like on the ati and also does it require longer bolts than the 4 stock crank pulley bolts?