ARP Head Stud Question

[1gGstKid]

This is my first motor build up and i pretty much have list and the specifications of all the stuff i need to get. But one thing i can't decide on is the head stud size. I like the ARP but they have a 12mm and a 10.5mm shanked and undercut. Whats the purpose of having the two different sizes? And which one should i get? Thanks for the help.


-Justin

 

[95blackGsTurbo]

ARP's shouldn't be listed by size they should be listed by motor. You will need 6 bolt ARP headstuds if you have a 6 bolt and 7 if you have a seven.

 

[NewTurboTuner]

Yeah just let the sales rep know whick motor they are for and he/she will set you up.

Good going with the studs too.
They're much stronger and easier to work with if you have to remove the head later

 

[1gGstKid]

ARP's shouldn't be listed by size they should be listed by motor. You will need 6 bolt ARP headstuds if you have a 6 bolt and 7 if you have a seven.

Ya those were the 6bolt applications. Here is the link to show you what im talking about.
http://www.tunerschoice.com/xq/aspx/paging.yes/dept_id.189/display_id.416/qx/Product.htm


Hopefully this helps.