Air intake issues

[Bigmike4g63t]

I had planned on using a Injen 2g air intake on my 1g, along with a 2g MAF. Does anyone know the K&N part number for the filter that will fit? I dont guess it has to be K&N if someone suggests something else.

 

[steve]

Depends on which adapter you bolt on the MAF. I don't think there is one that attaches directly to the 2G MAF without an adapter.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[CrackedDSM]

I don’t think the big wide k&n(first picture) works in the 1g engine bay. If I recall correctly it’s too big. (If you giggle you’re a terrorist.)


On mine the filter generally had to be the cone style and no longer than like 5-6”. ()

 

[dwb]

I run a 3g MAF with K&N RU-1005 (4.5"L x 4.5"W x 4.5"H).

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Bigmike4g63t]

The problem is there is very little room. Will have to be a short filter.

 

[curt-s]

meh, you constantly see those big supras running the short mushroom filters. There might be two of them but each one is pretty small -- plenty of airflow to be had from a short filter.
The only thing I noticed from running a gigantic one on my 2g compared to half the size on my 1g is the sucking sound is more pronounced on the long filter. And that's entirely turbo-based. It was loud on my b16g but is less than half the volume on the 68htav3.

 

[TheDude236]

I had planned on using a Injen 2g air intake on my 1g, along with a 2g MAF. Does anyone know the K&N part number for the filter that will fit? I dont guess it has to be K&N if someone suggests something else.

I ended up just getting filters directly from Injen themselves. They still sell them on their site from what I know.

 

[Bigmike4g63t]

Thanks for the info. I just called them and they do not have one that is short enough.

 

[dwb]

Thanks for the info. I just called them and they do not have one that is short enough.

Take a look at K&N's website here: https://www.knfilters.com/dimsearch/
If you know your measurements this should help.