93 shift box install

[Jdevil187]

I am installing a forced four shift box on my 93 awd.

I am not keeping my tcu. I'm having problems figuring out the selinoid pins.

I have a 2 plug tcu, and found 2 different diagrams but it just doesn't match up.

Can anyone pint me in the right direction?



Thanks

 

[Jdevil187]

I think I found one of the selinoids, because now it looks like I have 2nd and 3rd.

 

[91-GS]

IIRC there will be two wires. One is solid orange, another one is solid blue. Transmission switches gears based on what wire(s) get power. Both off will give you third gear ("limp mode").

 

[Jdevil187]

I'll give it a try, I am hooked up to pine #2 and pin #15 like the pin out says, but I'm only getting 2nd and 3rd. I don't think the wires are either blue or orange though.

I'll check in the morning

Thanks

 

[91-GS]

Don't know what pinouts you are looking at, but according to this one pins are 102 and 107:

 

[abelebd]

http://kiggly-racing.com/auto_shifter_wiring

check this page, there is some great information on here about auto trans wiring.

 

[Jdevil187]

I was actually looking at this one

http://dsmtech.forumotion.com/t49-how-to-make-your-own-shift-box-1g-2g-auto