The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

1G 450CC injectors with auto FPR?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blujeans

Proven Member
78
13
Dec 15, 2018
Calgary, AB, Canada
I recently bought 450CC injectors for my automatic 1G, and I'm wondering if it would be wise/nessecary to also install the fuel pressure regulator off a manual turbo 1G. I believe the PSI on the auto is about 43 while the manual's is about 39.

And before it's pointed out, the previous owner did install a manual ECU since the original one shat itself apparently.
 
If your wanting more flow from the injectors, go with the AT FPR

You must be logged in to view this image or video.


You must be logged in to view this image or video.

the numbers in the green box are the size when corrected for fuel pressure
 

Attachments

You must be registered for see attachments list
Last edited:
The manual ECU will help the car build boost. My auto car had a std ECU in it and it was fun. I put a 16g on it and it really liked it.
 
I ran 450s for a while on an auto fpr and manual fpr. Both worked fine, no issues that I noticed. Boosted well on a 16g.
I did end up getting a remote tune on the 450s with an 2g maf forwards the end of my time with a 16g. But like I said I didnt see any issues running the stock manual ecu on 450s and either fpr.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top