The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2ga 2gb 95 96 97 98 99 conversion bumper [merged]

97+ Talon Spyder...

  • That would OWN.

    Votes: 42 49.4%
  • It would look aight

    Votes: 20 23.5%
  • Ghey

    Votes: 23 27.1%

  • Total voters
    85

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

redturboeclipse, how much did you drop your car? and where did you get that spoiler? your car looks nicee!


so are there any other procedures that i might have to do differently than the article besides the side skirts? will the front and rear bumper's procedure be the same?
 
Originally posted by vital
redturboeclipse, how much did you drop your car? and where did you get that spoiler? your car looks nicee!


so are there any other procedures that i might have to do differently than the article besides the side skirts? will the front and rear bumper's procedure be the same?

thanks :) the car is dropped on progress springs.. 1.7inch front and back. the spoiler is a turbo spoiler from 97-99 turbo eclipses GSX/GS-T.. if u checked my gallery u can see my old red GS-T.. i fell in love with that look that wen i sold it and got the GSX.. i vowed to make it look exactly like the GS-T.. and i did just that..

also for those who hate about too many people doing the 97-99 conversion.. i have the most right to esp after owning a 98 gs-t before :p

the front and rear should be simple.. its puttint he side skirts on.. where u might have drill new holes.. also if u get the turbo spoiler.. u need to patch the old holes from old low spoiler (if u have it) and make new ones for the turbo spoiler.. i didnt put new holes though. ill leave yall wondering how. :)
 
ok i have a stillen front fascia for my car and they recomend piaa 1100x series fog lights. stillen said i can use the stock 97 fog light brackets. here is my question. can i bolt the 97 foglight brackets to my 96 w/out drilling any holes? i had the 96 foglights on it, so all the existing holes are their. will it be a direct match up?
 
sorry for the stupid post but I was wondering if I purchased a 95' GST if I could do a front end conversion with a 97' GST. Just wondering because I'm not all that into the 95'-96' front ends :barf:
 
I got pointed to this by the Mods, so im going to ask, I have 95 Eagle TSi AWD, and want to go to 97+ Eclipse body. The only thing that im asking is, the Rear bumper and lights and the Moon fin, (thats what i call it, its wraped around the rear window). Are they a problem??? and if so, is it a easy fix or a body shop job??? thanks.
 
Originally posted by Grimis
I got pointed to this by the Mods, so im going to ask, I have 95 Eagle TSi AWD, and want to go to 97+ Eclipse body. The only thing that im asking is, the Rear bumper and lights and the Moon fin, (thats what i call it, its wraped around the rear window). Are they a problem??? and if so, is it a easy fix or a body shop job??? thanks.


The rear fin thats up there will be hard to remove actually. The rear bumper and lights I've already explained to you.

You buy a eclipse's taillights and rear bumper+reverse lights. They bolt right up actually. Without a problem. That rear wing will actually be something they have to remove and I think cover the holes it leaves.

Goodluck in finding out more tho.
:)
 
Luckily my friend has a 97 and has to pay for a speeding ticket so i bought the headlights for 30 and my other friend bought his front bumper for 100, excelent shape, he just wasn't smart about what he could sell them for:thumb:
 
I've got a 97 talon, and have been considering swapping out for the 97-99 eclipse headlights but keeping my front bumper.

I read that the Eclipse 97-99 headlights don't come to the same point in the middle as the Eclipse 95-96 headlights (thus leaving a gap), but I'm not sure whether the talon shares those early 2g-design headlights with the eclipse or whether the gap would even be there.

Any help would be appreciated!

Thanks,
SK
 
Originally posted by suicideking
I've got a 97 talon, and have been considering swapping out for the 97-99 eclipse headlights but keeping my front bumper.

I read that the Eclipse 97-99 headlights don't come to the same point in the middle as the Eclipse 95-96 headlights (thus leaving a gap), but I'm not sure whether the talon shares those early 2g-design headlights with the eclipse or whether the gap would even be there.

Any help would be appreciated!

Thanks,
SK

The gap would be there. 95-96 and all 2g Talons have the same headlights.
 
Originally posted by Defiant
Here's the hole from using 2Gb headlights in a 2Ga bumper:

Its really too bad, I quite like the 97-99 headlights.
I suppose I could always just do a full conversion, but thats fairly costly.

Guess we'll have to see.

Thanks guys!
 
I was wonderin if I can put a 97-99 front end on my 95 eclipse all I want is a front end cause I dont like the 95 front ends so anyone with an answer to this please fill me in on any fabricating or wiring I would have to do to get this done
 
yes, you can directly bolt up these parts to make it look like a 97-99
front bumper cover
rear bumper cover
fog light bezel
fog lights
eclipse tails
there are also many people here who have done the conversion and you can find them using the search button

now that i anwsered your question do something for me. USE THE PERIOD KEY!!!
i have read every single one of your posts and almost everyone elses posts on these boards and have yet to see more than 1 period in your responses... Its not that hard to add the periods in your response and it will make it 10X easier for everyone else to read. THX
 
nothing like bringing a long forgoten thred alive, but 95-96 tails will work with the rear bumper?? i thought it had to be 97's? thanks, oh and pat, your link is dead from 2muchboost.net...:confused:
 
the tails are all the same from 95-99, only the headlights are different, and bumper, skirts, and rear bumper
 
I thought so, thanks for the qucik reply. Makes my converson go quicker now that i know where the 3 pice tail light set is in grate shape!!:thumb:
 
no problem, but were talking about the eclipse tailights not the talon ones right. Because the talon rear conversion to an eclipse rear bumper takes some custom fabbing with the bumper supports and stuff
 
yeah, im going from a 95 eagle to a 97 rear, I know there is some work involved in it, and i know there is holes back there that wasn't driled out, so other then that, i think i got it...:thumb: :talon: to a :dsm: who would have guessed it.
 
i have a 96 talon and i want to do the 97-99 eclipse front bumper conversion what parts am i gonna need? just the bumper and headlights. im thinking of goin with projectors what do u think?
:talon:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G Mishimoto Radiator & Fan Shroud
    2G Mishimoto Radiator & Fan Shroud $200 + shipping and paypal feesYou must be registered to...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G Power Window Switches ( tested and hardware included )
    2G Power Window Switches $55 + shipping and paypal fees* Tested 6/2/26 * Hardware included *...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale Garage clean out
    Changing setups on the car and getting rid of some stuff as well that's been laying around. Will...
    • 92GSXtacy
    • Updated:
    • Expires
Back
Top