20G internal wastegate bracket

[WOTDSM]

I have a 20G turbo (part number 49179-54900) that I need to make a bracket for for an internal wastegate. This turbo started life on a Subaru so the bolt holes for the wastegate bracket are facing the hotside of the turbo.

I would like to retain the internal wastegate but I am having trouble finding a bracket that will work. Does anyone know what my options are here?

I've attached an image for you guys. I bolted the wastegate to the turbo with some spare metal I had laying around but it's completely ghetto-rigged right now and I want a nice clean install. Thanks!

 

[Jaxness]

Send it to JusMX141. He fit a bracket for my 20g so I could keep the internal wastegate.

You must be logged in to view this image or video.

 

[polarmoment]

Send it to JusMX141. He fit a bracket for my 20g so I could keep the internal wastegate.

You must be logged in to view this image or video.

The difference is that you have lots of meat on the back of the housing by the comp snap ring to drill into. OP doesn't. He may need a different compressor housing.

 

[1gAWD92]

Send it to JusMX141. He fit a bracket for my 20g so I could keep the internal wastegate.

You must be logged in to view this image or video.

what did he charge you for the Bracket fab? i have the same exact compressor and need a bracket for it

 

[Steve93Talon]

Here's how I did a 20g actuator awhile ago, held 30 psi to redline, good enough for 11.0 @ 127.

 

[JusMX141]

what did he charge you for the Bracket fab? i have the same exact compressor and need a bracket for it

Price varies by application and time involved for the install.

Every 20G can be complicated for an internal gate install because no two people clock the cover the same. I have mounting brackets for both cover types...the 80mm inlet like the one Jax posted and the 60mm inlet like the one Steve posted.