Finally got off my ass and finished the plumbing on the new catch can set up. Kids, sports, life and work always getting in the way:rolleyes:Next is a paint correction/cut buff, contemplated a lot of doing it myself but it would just take...
Hey all, even tho I'm bandaged up, I'm still doing things that need done. My 20' dovetail trailer is getting front loading lights and a set of magnetic mountable rear loading lights, both on toggles on my trailer. All LED's. All 7" Spot/Floods...
Well.....I was doing "maintenance" around the house and found several air leaks around my electrical box and my washing machine plumbing so I grabbed a can of triple expanding insta-foam and went to work.Now in this instance, I have to say READ...
13 years ago. Self re built synchro trans with a twin disc clutch. Stock tcase, hd driveshaft and stock 4 bolt rear end.Another thing tho is your on an SS plate correct? I’d imagine with a new master/slave and properly functioning pedal...
It's an incredibly unfortunate downfall of this platform. I guess I was spoiled with the 6mt out of my STI. Expecting that the hydraulic system should just work but I shouldn't have assumed.There seems to be a whole finger pointing scenario...
Well the solid hub disk didn't last long. I adjusted the master the other day and took the car out for a cruise Friday night to see if it fixed it (it didn't) and tried a nice NLTS 2-3 anddddd the clutch got all funny.Pulled the trans and this...
Finally found some will to repair the car last week and took it out this weekend for the first time in half a year.
I think I needed that break because I can't think of last time when I enjoyed it this much.
Took some photos of it during...
I tested a whole lot of stuff with the trans but something seemed off so I ripped the trans back out. Oh yes this is getting old. But the good thing is the new billet basket and the billet input shaft are going in.
I'm out of fuel on my 996 Turbo and need to upgrade the fuel system (Walbro 450 pump, -8AN supply line, -6AN return line, etc.) before I can upgrade to bigger turbos. Currently at ~630hp (which is really pushing the stock injectors and fuel...
I've been struggling keeping my gauge pod secured since I didn't want to drill into my a-pillar trim. I tried double-sided tape but the heat would let the adhesive peel right off.So I made a metal band/clip out of an old windshield wiper refill...
I recently decided to let go of 820. It was an awesome car, but I just didn't have time to keep up with it anymore. Luckily, it went to a local enthusiast who already owns another Galant...So basically from one Galant hoarder to another, which is...
Since installing the FIAV bypass plate and resetting the idle it has been idling like a dream! Cold starts, warm starts, after driving, it doesn't matter. Idle has been rock solid without any surging! I am very pleased!This morning I...
I’ve still been playing with transmission pressures, I’m hoping tonight after some more valvebody changes the pressures are where I’d like to see them. Went ahead and through a diff locker in, this I have no idea if it’s going to improve anything...
Update:Weeks of "I'm sending you an engine."No spec sheet, no build list. Nothing. Have no idea what he is supposedly even giving me.Apparently he is driving a long block from Wyoming to Minneapolis this week since he couldn't figure out...
Oh, I see. I'm interested to see how it turns out.This weekend I fixed the issue with the wipers not working on High. I had previously eliminated the wipers but added them back in when I was rallyxing and the Blue/Black wire (that powers the...
It has been quite awhile since I posted on here. Made one more track visit after the shootout in November and ended up running a 8.76. Went ahead and did some evaluations of what’s next for the car. Ripped the chassis harness out and the engine...
On day one driving across western Arizona I had the check engine light come on a couple of times for what I presume was coolant temps. However the gauge only moved up a barely imperceivable amount. I’m not sure if the gauge is malfunctioning and...