1g cas question??

[talon913]

ok so earlier i was trading my eprom ecu for an mhi evo 3.so anyways we went ahead and swapped the pins on the connector.long story short we hooked it up wrong so i decided not to trade my ecu and just wire it all back up.well i wired it all like it was and now im getting a misfire ..so i pulled my cas all the way back towards the car and now it idles perfect and runs perpect.the reason why i moved it back is because the guy had played with it earlier when my idle started acting funny with his non eprom awd ecu.is running my cas all the way back one way causing any major problems.the car runs great just that i dont wanna run into problems if its to retareded back??? the car feels faster for some reason from doing this i broke all 4 tires loose for the first time

ok ..would my car still run perfect with the timeing fully going one way??like towards the car ....retarding it all the way

 

[DSM1G90]

Have you checked your base *5-BTDC timing before you start playing around with stuff that shouldn't be played with?

 

[Killa_dsm]

Yeah I would check base timing again. And you didn't have a miss fire problem before messing with your ecu plug pins correct? Then I would assume that would be your problem. Are you sure the pins are reinstalled properly? Double check it.