The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2G Fuel leak

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Colin rosti

Probationary Member
16
1
Oct 5, 2025
Kingston, Washington
I just installed a DW 340 lph fuel pump and it’s leaking from the fuel hanger rubber gasket. It specifically comes out the white plastic ring on the inside, it is a huge leak I'm getting big puddles on my floor. I have aftermarket fpr too and car runs fine while leak is happening.

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
I just installed a DW 340 lph fuel pump and it’s leaking from the fuel hanger rubber gasket. It specifically comes out the white plastic ring on the inside, it is a huge leak I'm getting big puddles on my floor. I have aftermarket fpr too and car runs fine while leak is happening.

You must be logged in to view this image or video.
Do you have a question?
 
I just installed a DW 340 lph fuel pump and it’s leaking from the fuel hanger rubber gasket. It specifically comes out the white plastic ring on the inside, it is a huge leak I'm getting big puddles on my floor. I have aftermarket fpr too and car runs fine while leak is happening.

You must be logged in to view this image or video.
What happened to the rubber gasket that goes between the hangar, and the tank?
You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Yea sorry, I was asking if anyone has had a leak through the top like that before or has any knowledge on it.
Overfull tank? - with a bad seal between tank and pump hangar - is the hangar seated all the way into the tank? Did the pump bottom out - badly? noisy?

I've had mine leak in that case,

The pump et all has gotta fit all the way into the tank, and make a level seal on top of the gasket - then you spin the white collar down as far as you can by hand, then whack with a 3/8 wratchet extnesion, or a fat common screwdriver with a plastic hammer until it stops getting tighter
 
Last edited:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Free 1G AWD Buschur 2.5" SS exhaust - In WISCONSIN
    Free to a semi-local DSM'er who can use it; picked up in Watertown, WI.2.5" Buschur Cat-back...
    • pma1123
    • Updated:
    • Expires
  • For sale 4G63 1000cc fic injectors
    Fic 1000cc injectors used for one summer
    • jesse12345
    • Updated:
    • Expires
  • For sale 4G63 SouthBay/RCI 2200cc High-Z Fuel Injectors
    Set of 4 RCI/SouthBay Bosch fuel injectors. These are 2200cc high Z injectors that have clip-on...
    • Canadian_CD9A
    • Updated:
    • Expires
  • For sale 2g 2G parts
    2G parts2G ignition, door locks, glove box and hatch( hatch lock doesn’t turn) comes with 1...
    • Dsm_canadian_mike
    • Updated:
    • Expires
  • For sale 2g 2G harnesses
    2G harnesses2G 97-99 under dash wiring harness MR225461 $502G front Chassis wiring harness...
    • Dsm_canadian_mike
    • Updated:
    • Expires
Back
Top