wiring up an innovative lc-1 on a 1g

[Batmobile 1G]

i have an innovative motorsports wideband kit and it has a box style display and an aux cable that resembles a mini head phone jack and the other end of the wire is three stripped ends im guessing that this aux cable what you use to log wb output to dsm link but where do i wire it in?

thanks

 

[GsxEcutioner]

wire the brown wire to the Ecu Input for the front o2 if your putting it in the stock location and simulating NB. Then go into the software to check outputs for the brown wire the way it states on ECMLink wiki.
innovatelc1orlm1install [ECMTuning - wiki]

 

[Batmobile 1G]

i was actually planning on on welding in the bung and keeping the stock NB and i read on the wiki that you can wire it in through the egr temp sensor ubove the brake booster. that is possible right?

 

[GsxEcutioner]

Yea , I would run it into the car and tap it at the ecu .

 

[Batmobile 1G]

i was actually mistaken it appears to be a LM-1 is there a difference?

disregard the ubove post im still learning about the brands and versions for a WB