wiring in MAP sensor

[Got Boooost]

Hey guys,

i stalled a magnum racing intake manifold and now im not sure how to plug the map sensor into the intake manifold, does anyone know how i go about doing this?

thank you

Vern

 

[spinz4]

You'll have to use one of these:

EXTREME PSI : Your #1 Source for In Stock Performance Parts - JM 2G MAP Sensor Adapter: Mitsubishi Eclipse 95-99

Or find a way to rig it together.

 

[dsmusmc]

Thats what i used and have never had any problems.

 

[Got Boooost]

Would you happen to have a picture of this adapter installed? im unsure how this get installed. it mentions this adpater is bolted to the back side but on my intake manifold theres no where to bolt it. do i need to drill holes?

Vern

 

[Lumix315]

Would you happen to have a picture of this adapter installed? im unsure how this get installed. it mentions this adpater is bolted to the back side but on my intake manifold theres no where to bolt it. do i need to drill holes?

Vern

No man. You must have skimmed over it too fast. Go back to that link and read it again.

It says that THE SENSOR is mounted to the BACKSIDE of the ADAPTOR, the vacuum line is run from the barbed end, and then tee'd off to the intake manifold's pressure source.

Looks like you're going to have to get a little creative and fab up your own way to mount this bad boy.

Let us know what you come up with.