which vaccum line?

[mike hobbs]

hay wats up everybody, i just have one question because im trying to get this done so i can hook up everything. I dont really know if this is suppose to be in here but can someone tell me what vaccum line im suppose to tap into on my 1g talon for my boost gauge. this would be a lot of help thanks.

 

[iluvmy4g63]

i taped in to the one on the intake manni. its kinda near the brake booster hose and the pcv valve. its small. use a vac-t there. its near the coil pack. also you don't want any kincks in the line . that will give bad reading.

 

[1992awdlaser]

The best one to use is the fuel pressure solenoid vacuum line. In this vfaq you can see where it is. http://vfaq.com/mods/wayback/BradBauer/gauges/boost.html

 

[tbonitz301]

I have mine tapped right into the intake manifold, but i agree that the fp solenoid is the best source

 

[mike hobbs]

ok thanks because i kept getting mixed reviews from the fuel pressure but im just about to go with the silenoid thanks.

 

[laserspeeddemon]

The issue with tapping into the FP line is if you loose vacuum there (break in boost signal hard line, loose T-fitting connectios, ect.), the FPR will close and could you have serious FP issues. But, with that said, that's where I have my boost gauged tapped into.

 

[illeffekt vr-4]

The P port on the throttle body is the way to go.

 

[Defiant]

If only there was a Technical Article somewhere that told how to install a boost gauge.