The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

what pistons are good for my car

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Turbizmo

15+ Year Contributor
430
0
Jul 3, 2005
Salinas, California
HI I wanted to buy me some pistons for my 420a turbo. My question is what pistons are good for my car. How much would they cost and where can I get them? I am buying the pistons because my compression was low and I am planing on rebuilding it. Any of you guys know of some good forged pistons for the 420a. What would be a good bore size and compression ratio too. Also should I replace the stock rods?
 
Lower compression pistons than stock are what most turbo guys use for their 420a's.

Use the search feature up towards the top and type "pistons" in the 420a turbo conversion section. There will be quite a few posts asking the same question as you and you will be able to find all of your answers there.

The search feature is your friend. :thumb: And yes, you might as well replace the stock rods while you are at it. You will be able to find this answer as well.


Another thing...you might want to either add to your profile of your 420a setup, change it completely, or list your mods, being that the car shown now wont help much in the 420a section.
 
Definately look at what other people are running, (car profiles on the left side)

Wesico and JE are your quality and cost effective pistions,

It pretty much goes up from there.
 
Definately look at what other people are running, (car profiles on the left side)

Wesico and JE are your quality and cost effective pistions,

It pretty much goes up from there.

Does anyone know what sites i can use to buy some pistons for my car :confused: i saw some on ebay JE for 780 bucks :sosad: so yeah any cheaper site will help me alot
 
Here and here are two Supporting Vendors off the top of my head that sell pistons for the 420a. There are others. I am not looking for them. :)
 
Are you sure that the price didnt include the rods too? This was on Ebay. $790 for all not just the pistons.

420A turbo 8.8:1 compression +.020 bore

JE Forged Dish Low Compression Race Pistons

JE moly racing rings

Eagle H Beam Rods
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top