what else is needed for a 50trim

[boostmaster123]

Take a quick look at my mods list and see what else i will need to run a 50 trim at 20psi. Will an AFC2 be a good enough tuning tool? Before i buy anything im gonna get some wheels and tires for traction but other than that i dont know what i need. Do i need to do anything to prepare the motor like studs and gaskets?

 

[DSMPowerTSi]

I would say a datalogger, front mount, and 680's.

 

[boostmaster123]

is the AFC2/Datalogger combination an accurate way to tune a 50trim?

 

[Groomz]

Originally posted by boostmaster123
is the AFC2/Datalogger combination an accurate way to tune a 50trim?

A DSMlink would be better since you have a 1995. The SAFC/Datalogger combo is well proven though and should work.

 

[DSMNightmare]

550 injectors will hold you on a 50trim@20psi. Any higher and your going to start to max them out.

 

[boostmaster123]

i mean im not nessicarily going to only run 20 psi but i at least want to get rid of this t25 without pushing the cars limits. So 20 psi is just to get me started. As far as the DSM link goes, i would like to do that but isnt it alot of money?

 

[DSMPowerTSi]

It cost upwards of $600 if you have a compatible laptop. BTW after you buy your logger,logger cable, and safc you probably could buy DSMLink and a cheap compatible laptop. Same price in the long run, hundreds of cool extras.