Transmission Mount

[georgie2577]

I am trying to install a new tranny mount and am having trouble getting the old mount out. It only needs about another 1/4 of an inch but i just cant seem to get it out. Ive removed the front and rear motor mounts hoping to drop it down enough to remove the tranny mount but I still need a little more.. Any ideas?

George

EDIT! SO SORRY.. This is on a 95 gs-t

 

[92redman]

Unbolt it from the tranny, there are two 17mm bolts holding it on that are not easy to get to and are torqued like a mofo

 

[georgie2577]

Yes sir.. I have the mount unbolted from the tranny but the darn thing wont come up over the studs. Its like the transimission needs to lower just a little bit more.



EDIT!!

SO SORRY!!! This is on a 95 gs-t..

 

[92redman]

Then unbolt the other half of the mount from the fender area.

Edit: ah, it's probably different on your car then.

 

[georgie2577]

All bolts have been removed and motor mount is completely lose.

EDIT Yeah sorry man..

 

[georgie2577]

a buddy of mine over at the dealership says to doublenut the studs and drive them out. Lets see if that works.