transmission bellhousing disassemble help

[lasershark]

so my bellhousing on my talon broke a while ago but shifted perfectly prior to this

my gsx grinds second (higher rpms) and third always

i was going to pull the gsx tranny and put the front of that bellhousing on the transmission with the broken bellhousing.

I almost got it apart but it seems to not want to finish coming apart, its separated about 1 1/2" all the way around.

is there a trick that i'm missing?

help would be appreciated

 

[synthetek]

The bell housing comes off last, you have to start from the other end and take everything else apart first.

http://www.vfaq.com/mods/Trannyrebuild.html

 

[hotrodssnova]

You need to start from the other end. Its almost modular. Once you get the end cover off, you will see.

 

[lasershark]

well thats more complicated than I was hoping for thanks for the help

 

[synthetek]

well thats more complicated than I was hoping for thanks for the help

Yeah, Unfortunately the bell housing is like the last part to come off after the whole trans is pretty much disassembled.