The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

timing belt

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hectorb25

10+ Year Contributor
74
0
Sep 16, 2011
miami, Florida
so i need to change the timing belt on my car before it blows off. im looking around and apperently the best one out there is GATES does anyone have any other brand or experience with this brand ? im also changing the motor mounts anyone have any ideas which ones to go with ?
 
I've used gates on my cars in the past, they make good belts for a lot of vehicles out there. They even make timing belts for some motorcycles (like Ducati). They're good stuff.
 
The belt is the same for 4g63s (6 & 7 bolt) but the timing components aren't. So be sure to buy the right kit for the year of your car (or motor) :thumb:
 
Go to stm man they have everything you need and shipping is only 3dollars..
Stm has the oem timing belt for 60-70 and balnce shaft belt for 32, idler pulley 44, tensioner pulley 33
And haudralic tensioner for 100.
You on el paso is a big city go oreillys they have everything you need if get parts from oreillys get gates..
 
Gates make the OEM belts so yes they work great. I have the PCI pulley kit that cones with Gates belts. Technically Gates makes the stuff for PCI and then PCI sells it for almost nothing.

PCI heavy kevlar belts are better and cheaper than OEM kits.
 
This is all you will need, just select the appropriate pieces for your motor.
Complete DSM Timing Belt Replacement Kit - Modern Automotive Performance

OEM belt is 100% fine to use and can withstand a lot of power. Gates is another good brand as well for not much more than the OEM belt. Some people get it for the extra strength, others get it because it's blue.

"Best" is opinionated, some people consider things best because they are stuck on names, know that it works, or go by price. If you go by the price then the "best" must be the Power Enterprise belt or an HKS belt. Some people consider the OEM belt the best because it's durable, affordable, and has lasted 9sec runs.

You'll still want to change it at the regular 60k intervals since the other timing parts are on a 60k change and if it gets damaged or oil soaked you'll need to change it as well.

While you are at it, consider changing the water pump too.

I would suggest getting this.
http://www.jayracing.com/index.php?main_page=product_info&cPath=17_229&products_id=214
 
Last edited by a moderator:
The motor mounts that rengar18 suggests would work but I would try to find solid mounts for all 4 brackets, avoid the inserts that sit over the stock rubber mounts since they are POS and will break after a while. I found that out on my 1g kit that had the inserts for the frount mount and have since gotten rid of the inserts for a solid mount on the front. The only thing if I can rember correctly is that to be able to use solid mount inserts on a front and rear 2g mount you have to modify your brackets some how, I rember seeing a post somewhere about it. something like this might be the easy way to go Avid Racing Motor Mounts 4-Piece Eclipse Talon 2G DSM | eBay

And the MAP kit seems ligit if you get a new tensioner with it, not that tensioners ever really go bad but why not replace it I guess. Here is a kit that would probably work just fine for a little less | O'Reilly Auto Parts

And I also agree with Liquidx, replace the water pump while your in there!
 
Rockauto sells the complete Gates belt kit (BS, Timing, all pulleys) for under $70 shipped, don't forget to get a waterpump. Advance sells GMB's for $35, rockauto has them for $43.

Like stated, prothanes are going to be the best route as far as inserts go.
 
The motor mounts that rengar18 suggests would work but I would try to find solid mounts for all 4 brackets, avoid the inserts that sit over the stock rubber mounts since they are POS and will break after a while. I found that out on my 1g kit that had the inserts for the frount mount and have since gotten rid of the inserts for a solid mount on the front. The only thing if I can rember correctly is that to be able to use solid mount inserts on a front and rear 2g mount you have to modify your brackets some how, I rember seeing a post somewhere about it. something like this might be the easy way to go Avid Racing Motor Mounts 4-Piece Eclipse Talon 2G DSM | eBay

And the MAP kit seems ligit if you get a new tensioner with it, not that tensioners ever really go bad but why not replace it I guess. Here is a kit that would probably work just fine for a little less | O'Reilly Auto Parts

And I also agree with Liquidx, replace the water pump while your in there!


Yea but not everyone wants to feel every vibration. Solid mounts are a Pain in the $$$ if your DD'ing the car.
 
I can say you are wasting money on it since you are paying for the name. If you want a kevlar belt just go with the Gates belt.

Also if you can ask on here for a link I'm sure you can go on google and type in HKS timing belt dsm and find what you need.

Here I thought Google was easy :rolleyes:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top