things i did to my dsm in southern california today.

[andrewrnava]

Do you mind holding it for me

 

[Nito15]

Hey Gufi this is the most recent local 2.3 build, I think my friend built it no fancy shop name just put together with stuff that works correctly. Grey Evo - YouTube

 

[Zefal151]

Btw do you know how hard it is to get rid of some 3g eclipse wheels? No one wants to buy them , hopefully cl can help me

 

[goodbuds]

Gufi just buy what uuuuu need and send it to hopsing. Biggest bang for your buck.

 

[gufi]

well to do it i would need a crank, some rods and pistons in reality thats about it... and a BS elim kit. would also have to get the block clearanced and bored/honed as well as decked.

anyway you look at it there is no cheaper than 2300 or so for a stroker. a 2.0 however would only cost me 1200 or so after getting a block machined.

 

[banishedmunk]

your best bet would be just do a 2.0 with higher compression maybe a 9.0:1 wiseco something simple not to crazy and just have hopsing assemble it he assembled donalds motor and it is still holding together. or I can talk you through how to do it.

 

[goodbuds]

On another note, I acquired some 2150 today.......Soo I will be selling my new fic 1150cc injector flow sheet and all.. Pm me for info. My price is fair.

 

[agarc023]

Hey Corey didn't you have the older version of that catch can?

On another note, I acquired some 2150 today.......Soo I will be selling my new fic 1150cc injector flow sheet and all.. Pm me for info. My price is fair.

Really tempting (even though if I did get em they'd be sitting for a while), but I'm saving for some proper motor mounts

 

[gofer]

Yes. I have Craigs v1 catch can with -8AN inlets and -8AN outlet. I'm selling it with the inlet -8AN lines/fittings to run it from the stock valve cover ports to the catch can. $175 if you're interested.

The can itself was $175, the two Earls -8AN 90* hose ends were $30 each, the 36" Earl's -8AN hose was $30, too. That's $265 (without tax) and I only used it for less than a month and 500 miles, however, you'll still need fittings/line to run it to your intake.

 

[agarc023]

Well it was curiosity that led me to ask since I thought I had seen your car with one.

I actually already happen to have the v1 can. All I'm missing is lines and fittings...got a valve cover all ready to go. I'd be interested in the lines you have, but my fittings on the can and vc are -10AN (planning for the future )

Andrew might want it...but then again he wants you to hold the wideband

 

[gofer]

I won't be letting go of the lines/fittings, they will sell with the can since I've go no use for them now. Well, now you know so you can tell your friends.

Andrew, you interested? I also have a freshly powdercoated wrinkle gray valve cover (with baffles) that looks amazing if anyone's interested. $150.

 

[donaldseclipse]

your best bet would be just do a 2.0 with higher compression maybe a 9.0:1 wiseco something simple not to crazy and just have hopsing assemble it he assembled donalds motor and it is still holding together. or I can talk you through how to do it.

Hey is this a bash on where i get my engine assembled kris jk hopsing does great work But for alittle more cash im now using a guy Larry Holts @Speed Specialties they give more attention to my motor and they do work on drag race cars. Hopsing does engines for a few dealerships in sd

 

[agarc023]

I won't be letting go of the lines/fittings, they will sell with the can since I've go no use for them now. Well, now you know so you can tell your friends.

Can't use em anyways...

and I don't have any friends

 

[Zefal151]

Too bad injectors are not universal

Need to find some decent priced 1200cc (approx) injectors... trying to do an E85 Dual tune so need some injectors, a FP and a 3 port BCS

 

[banishedmunk]

buy my pte1200's for 200.00 then

 

[andrewrnava]

Haha I would be buy ed gave me his rre caught can so il good for now just looking into the wb and maybe ed's injectors

Yo Ed by the way I got towed he today:/ ###

 

[yeti-gvr4]

sat in my car and made race car noises!

 

[Zefal151]

vroom vroom

 

[andrewrnava]

I hate seeing my damn car on a tow truck

 

[Zefal151]

It looks good, at least its moving when up there but kidding aside that sucks hope its not major

 

[goodbuds]

You should start thread with dsm getting towed, im sure there are alot more out their.

 

[andrewrnava]

Hahaha
Yeah it's fine there was a tire on the freeway and I hit it and it went under the car an ripped my oil pressor sensor and my car was bleeding

 

[gufi]

installed SS braided line to replace black bellowing piece of shit, waiting on some one to arrive to help me bleed the system.

noticed that there were a couple ripped pieces of the outer casing on it, as well as the worn piece that i "repaired" with silicone and a hard plastic shell. hopefully this fixes it...

 

[MikeSD]

Corey were are the pics?

 

[goodbuds]

Got 2150 in mail wow... They look like they don't belong in a car