The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Fuel Injector Clinic

Suggestions on making my own turbo intake?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

darkmajesty06

Probationary Member
16
0
Mar 9, 2013
poplar bluff, Missouri
Hello,

I have searched a bit and found that you can use a 90-93 Honda Accord intake to make your own fender well pipe. My question is is there anything else that's larger? the Honda intake pipe is only 2.75 inches in circumference. I need a 3-4 in kit... But im not really wanting to spend what most companies want for a pre made intake. I bought a name brand JLT imtake for my mustang and it cost around 95 with a 9"x4" kn... So it baffels me why a smaller pipe with 2 bends cost 145 at least. So if anyone has made one or has any suggestions, let me hear them!
 
Try searching on ebay. Or just get some piping and bend it across a anvil or a plumbers pipe bend.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top