SS braided line for AFPR

[DROPthatCLUTCH]

I'm looking for the braided line for my AFPR.
I have all the fittings, I just need the line that fits in between the elbow fitting, and the fitting that replaces the stock FPR.

If you have a link, it would be greatly appreciated..

 

[turboglenn]

Jegs, Summit adn any circle track store locally will have it. it's just called Stainless Steel braided line/hose. The sizes are marked by numbers with a dash "-" then a digit 6 followed by AN (army/navy)

YOu probably need about a foot of -6an SS braided line.. the real fun is going to be learning to use it without walking away with your hands covered in blood.. took me a few years to perfect my way of building em..

 

[DSM Jeff]

Check out the supporting venders, if you don't have any local speed shops.

 

[force it in]

Here ya go.
DSM 1st Gen. Fuel Rail adapter - OEM to -6AN

 

[DROPthatCLUTCH]

Sorry my original post was kind of confusing.

I have the OEM adapter and the elbow AN fitting. I just need to get the SS braided line with the fittings on the ends, to go in between the two.

 

[99gst_racer]

Hopefully this can give you a better idea of what fittings you need to buy (unless you're just going to buy one of those cookie cutter kits): http://www.dsmtuners.com/forums/articles-engine-fuel/228159-how-build-your-own-afpr-kit.html

 

[DROPthatCLUTCH]

You must be logged in to view this image or video.

JIC/AN straight -6AN
Aeroquip = FCM1012
Earls = 800106
XRP = 100006 (non-swivel only)
Russell = 610020

That is the fitting that is on both ends of the braided line, correct?

 

[99gst_racer]

That is the fitting that is on both ends of the braided line, correct?

That's one example. Like the article mentioned, you could also use a 45*, 90*, etc...