Sotck T-25 oil feed fitting size to turbo?

[mustard95tsi]

I've searched this and i keep coming up with different answers so i figured ill ask. I'm putting my car back to stock to sell and can not figure out what size fitting threads into the t-25 itself. any help would be appreciated.

Thanks!

 

[ryztriumph]

http://www.dsmtuners.com/forums/newbie-forum/364296-t25-oil-feed-line.html

 

[mustard95tsi]

I've read that but am still unclear as to what the size is that's going into the T-25. I'm just in an extreme rush but something must not be clicking for me.

 

[JusMX141]

11mm x 1.0

OR

7/16" x 24


They're exactly the same.

Moderator edit: they’re not exactly the same — close, but not exact.

Nominal diameter comparison
11mm = 0.433 in
7/16in = 0.438 in

Pitch comparison
1.000 mm pitch = 25.4 threads per inch = 0.039 inch pitch

0.042 inch pitch = 24 threads per inch = 1.058 mm pitch