oil feed fitting

[4g63ttuner]

im in the process of putting a 20g turbo on my eclipse. i have bought a stainless steel line from a buddy that came off a different car. the fitting for the oil filter housing fits fine. but the fitting im looking for is to the turbo. anyone have a idea of what size for a fitting to get? or should i just pay the 65 or 85 bucks for a fitting and line kit? also the kit say for mitsu 13g 14b 16g ect should that also include for a 20g or should i consider it a t3/t4 fitting size?

this is the first kit:
FP 1g Oil Supply Line - Turbo Accessories - Turbo - DSM Performance Parts | DSMparts.com

and this is the second kit
Stainless Oil Feed Line & Fittings - DSM Turbo 90-99 - Turbo Accessories - Turbo - DSM Performance Parts | DSMparts.com

 

[JusMX141]

Depends on what thread your turbo has- it could either be 12mm x 1.25 or 12mm x 1.5.

If you're spending $65 on an oil line kit, you're paying way too much.

 

[BrokenTsi]

If its a -4an line, you need this:

EXTREME PSI : Your #1 Source for In Stock Performance Parts $9 and you're all set.

I dont like the idea of using a banjo type fitting for the turbo. It will work but I just dont like it myself.

 

[4g63ttuner]

ok thanks guys