Oil feed fitting problem

[Aphix]

I've got my t25 out sitting on the bench next to my 14b. On the t25 the oil feed fitting that bolts to the engine is just a flared end w/ a nut, while the 14b fitting is a banjo. I have read alot of posts on installing 14b's and I've never heard anyone mention this as an issue. But now I'm not sure how I'm going to bolt up the 14b, could anyone elaborate on this?

 

[95GSXCO]

Its because you have to use the 1g feed line to the head. Then plug the stock 2g OFH feed with a plug. If you need the plug let me know I dont need it anymore since my HX install. I even have the 1g feed also!

 

[Aphix]

Thanks for the reply. I actually ended up going NAPA and getting a 6" piece of brake line and a couple fittings and bolted it back up to the stock 2g location