The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

show me your rims

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Yeah, I was able to glean that bit from the Googling. My issue with the info on them is that there are about 10 different AV variants, and these are so old I don't have a real rim "name", just the series.

Good find, though.
 
I have a friend that deals with alot of old school jdm stuff ill show him a pic and see if he knows anything more
 
Just a couple shots of our collection. Rims are traklites, motegi dp10, dp5?,....

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.

traklites 17's
You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Just a couple shots of our collection. Rims are traklites, motegi dp10, dp5?,....

You must be logged in to view this image or video.

What fender is this, it blends really well with the talon lines. :applause:
 

Attachments

You must be registered for see attachments list
like PogiGS-T said you should deffinitly go with the rota subzero, gunmetal or bronze will look real good on that color green. I know someone that had a gsx in that color. They had Blitz techno... wheels in 18's in hyper silver, looked real good with that green. Blitz wheels will set you back 2000 or so.
 
Here are my ### wheels :). 17x8 +35 offset wrapped with 245/40/R17 Hankook Ventus V112 Evos. They hang about an inch out of the fenders. My car is lowered 2" on Tokico HP Blues with Tokico HP springs with an Ingalls camber kit in the rear and the rear end set to -0.15 degrees.

I have no rubbing issues at all because my suspension is not worn out. No fenders have been rolled either.
You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.


Oh and they are bronze
You must be logged in to view this image or video.

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Here are my ### wheels :). 17x8 +35 offset wrapped with 245/40/R17 Hankook Ventus V112 Evos. They hang about an inch out of the fenders. My car is lowered 2" on Tokico HP Blues with Tokico HP springs with an Ingalls camber kit in the rear and the rear end set to -0.15 degrees.

I have no rubbing issues at all because my suspension is not worn out. No fenders have been rolled either.
You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.


Oh and they are bronze
You must be logged in to view this image or video.

You must be logged in to view this image or video.


That's one sexy GSX right there!
 

Attachments

You must be registered for see attachments list
That's one sexy GSX right there!

Thanks Guy.

Here are a couple to show how far they stick out in the front, keep in mind they do not rub :D

Don't mind the dirt, the car hasn't left the drive way in over 3 months LOL
You must be logged in to view this image or video.

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Thanks Guy. Here are a couple to show how far they stick out in the front, keep in mind they do not rub :D Don't mind the dirt, the car hasn't left the drive way in over 3 months.[/IMG]

In three months...? What's up with that? I'd have that joker on the road all of the time.
 
Rota Subzero 17"x7.5" +45 225/45/17 tires
 

Attachments

You must be registered for see attachments list
In three months...? What's up with that? I'd have that joker on the road all of the time.

Upgrades and cleaning everything up in the engine bay just short of a wire tuck. The bay looks really clean now. I also welded VBand flanges on the exhaust, I'm gonna wetsand and buff the car too.

I'm also in winter prep mode grinding down all surface rust POR-15, enamel zinc primer and rubber under coat, this is my only car. They salt the roads here and I just want to take care of every thing that way all I have to do all winter is rinse the car off and not worry. I have way to much money to let it rust into the ground.
 
You must be logged in to view this image or video.


works CR-KAI 18x8.5 et43 (bronze)
 

Attachments

You must be registered for see attachments list
My old 2g 16s stock.
You must be logged in to view this image or video.







Here's my favorite. azdave's old 2g with 18' volks
You must be logged in to view this image or video.


You must be logged in to view this image or video.


Look at that stance.
 

Attachments

You must be registered for see attachments list
Hi :)

and that's mine Falken Torque 18''

With a Evo brakes and wider fenders looks really nice

You must be logged in to view this image or video.


You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Hi :)

and that's mine Falken Torque 18''

With a Evo brakes and wider fenders looks really nice

You must be logged in to view this image or video.


You must be logged in to view this image or video.

Your calipers look great, :rocks: not fan of those wheels but thats just me.
 

Attachments

You must be registered for see attachments list
Kosei Japan's (Old):
You must be logged in to view this image or video.


2g stockers painted black (soon to be painted highlighter green w/ Eibach Pro Kit):
You must be logged in to view this image or video.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top