Safc Tuning Help

[hottboost]

Finally got the wiring harness for the Safc, I sell cars so Im having a Mech. in the back do it for me....Ive been too busy. Anyway Ill be putting the 550's in at the same time. My question is I live about an hour from work so Ill have to drive the car home. I need just a quick base line setting to get the car home safely untill I can tune it. I have read the tuning guide on here and also the one on RRE's site. I was thinking about -30%High and -18% for low. Would that enable the car for me to get it home safely. I can stay out of the boost for the most part on the way home. Thanks in advance

 

[CanadianTSi]

I would start with -15 across the board, that should leave the car enough room to make any needed adjustments.

 

[hottboost]

So it would be driveable at -15 across the borad. I have a logger and will tune it when I have time, but just want to keep it driveable till I get it home.

 

[talonTSIDriver]

-15% would be good, -30% would be way to much correction. my 650cc inj. are around -27 to about -33%.

 

[hottboost]

Great!!!!!! Thanks.