Right cable for DSMLink on Palm IIIc?

[thekellbeast]

I haven't ordered DSMLink yet, but I have a Palm IIIc and a 95 eprom ecu, so I'm ready to. I was reading that you need a serial modem cable to run DSMlink on a palm, but in other threads I read that you need a null modem adapter and gender changer and other things like that. I'm not sure if they were talking about Link or TMO or some other software. This has me a little bit crossed up. So here's the cable I'm looking at.

http://www.cablestogo.com/product.asp?cat_id=2102&sku=27103

You must be logged in to view this image or video.

Is this the right cable and does this just go from the Palm to the DSMLink cable? Thanks a lot.

 

[1990EclipseGSX]

You can use the cable they supply from DSMLink. All you need is a null modem and a gender changer, which can be had for $10 at radio shack.

You need one of these: http://www.radioshack.com/product/index.jsp?productId=2062210&cp=&kw=null+modem&parentPage=search

And a gender changer:
http://www.radioshack.com/search/index.jsp?kwCatId=&kw=db9 gender changer

And you will need a serial hotsync cable for your palm, of course.

 

[thekellbeast]

Allright, I've got the serial hotsync cradle that came with the Palm and both a male-male and female-female gender changers. I'm going to another Radioshack tomorrow to get the null modem adapter, since the one in the mall didn't have it. Thanks.