The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Rear drums conversion

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mazenb9981

15+ Year Contributor
49
0
Sep 27, 2004
Detroit, Michigan
I need to convert my rear drums to rotors on my 99 RS. I need to know what to do and where to get the parts from and if I can find them in one kit. Any instructions or articles about this converstion will be helpfull. Pictures with instructions too.Thanks all
 
Check out my car domain site for instructions and pics of the process. You need the calipers, rotors, hubs with ebrake cables, brake lines, and caliper mounting bolts. Takes about 1.5-2 hrs your first time. I can get em on/off in about 30 min now. ;)
 
mazenb9981 said:
I need to convert my rear drums to rotors on my 99 RS. I need to know what to do and where to get the parts from and if I can find them in one kit. Any instructions or articles about this converstion will be helpfull. Pictures with instructions too.Thanks all

I just did this conversion today. I had e-brake cables from a gst and full spindle assembly's off a gst. I only used the hub w the caliper the rest of the spindle went on the scrap pile. First I disconected e-brake lines from inside the car...(it's easy to do if you remove the seats) I removed both e-brake lines. Then I disconected brake lines to drums and attached the calipers and put to the side out of my way. Here is where I saved alot of time..instead of breaking down the drum brake I unbolted the four hub bolts(keep these bolts) and removed hub with e-brake lines attached.
It was very easy puting the new e-brake lines in. From there I broke down the disc brake assembly, attaching e-brake cable and assembling brakes behide rotor, here is where I used those 4 bolts to attach new hub. From here everything looked good so I put the new rotor on and caliper with new brake lines. This took me about 3 hrs total and I had no clue what I was doing other than I put it back together the way it came apart. Also check the tension of you e-brake cables I had to losen mine..
 
what is a good web address to find rear brake conversion kits from drum to discs for a 1999 rs eclipse
 
I need to convert my rear drums to rotors on my 99 RS. I need to know what to do and where to get the parts from and if I can find them in one kit. Any instructions or articles about this converstion will be helpfull. Pictures with instructions too.Thanks all

2GNT.com - Rear_Drum_to_Disc_Conversion

THIS IS A GREAT WRITE UP THIS IS WHAT I USED WHEN I DID MINE..

IF YOU NEED ANY HELP SEND ME A PM I WILL GIVE YOU MY NUMBER AND I WILL WALK YOU THROUGH IT:thumb:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top