Rear Brake Conversion!

[Spyder4g64]

I'm swapping out my drums for rotors and i bought the ss lines, and GST calipers... I have metalmaster pads and rotora rotors, but im kind of confused on the mounting assemblys... What more do i need to do this swap? Tell me exactly please... Only respond if you have done this swap... Thank you!

 

[Bostedquest]

I'm swapping out my drums for rotors and i bought the ss lines, and GST calipers... I have metalmaster pads and rotora rotors, but im kind of confused on the mounting assemblys... What more do i need to do this swap? Tell me exactly please... Only respond if you have done this swap... Thank you!

well you do not need to have done the swap to tell you what you need... all cars have the same type of parts...
Backing plates.
Caliper mounts that bolt to the axle
Caliper brakets that actually hold the calipers
Calipers
Lines
E brake cables for the disk brake
pads
rotors
a brake flush afterwards
that should be about it.

 

[Spyder4g64]

You dont need the ebrake lines... thnx for yor help... Anyone who has done the mod please help me out... Tell me EXACTLY what YOU used and of any problems you ran into... I read "Curt's" page but i want to hear a second opinion....