The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

ran my power wire for amp and engine fed?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hydrastas

10+ Year Contributor
151
0
May 29, 2008
tonganoxie, Kansas
alright i rewired the whole positive section of the cars power wires to get a 4 ga power wire hooked up. afterwards i hook up the positive to the battery again and got in to move the car. when i turn the keys over the turbo gauge goes to the middle like normal and then when i turn the car over to start it the gauge immediately goes to the bottom and the car starts goes to 1k rpm and then flatlines, doesn't try to stay idle in any way just shuts off. if i hold my foot on the gas the engine sputters but stays on but no matter how long i hold it when i let go it dies. i checked all the fuses and nothings blown. no ideas here.
 
wow i feel stupid, when i redid the electrical i loosened the MAF sensor LOL. it looked connected but was a mm or so off. back to norm now though
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top