Sirnixalot
10+ Year Contributor
- 328
- 11
- Jun 5, 2010
-
Cayman Islands,
Central America
What a pain in the ass job....
Dropped the rear subframe, swaybar, diff etc and got the rear bracket and front mustache bar off to swap out to new Ralliart solid rubber mounts. They needed it BAD, i hit the middle part out of the old bushing out with one soft strike of the hammer.
Before the front mustache bar was able to have about an inch of movement up and down (see circled area)
But now ill be damned if they move a millimeter!
Some of the new bushings in their new home!
Only 6 bushings left, rear trailing arms and the 2 front lower control arms.
Here is an updated shot of the projector lights i fixed as well.
Dropped the rear subframe, swaybar, diff etc and got the rear bracket and front mustache bar off to swap out to new Ralliart solid rubber mounts. They needed it BAD, i hit the middle part out of the old bushing out with one soft strike of the hammer.
Before the front mustache bar was able to have about an inch of movement up and down (see circled area)
But now ill be damned if they move a millimeter!
Some of the new bushings in their new home!
Only 6 bushings left, rear trailing arms and the 2 front lower control arms.
Here is an updated shot of the projector lights i fixed as well.
