Power Steering line replacement

[1sicvr4]

Basically I'm in the process of changing my power steering line as I managed to put a crack in mine while changing my intercooler on my GVR4. Now I was told that I should cut the power steering line just where it exits the radiator support panel, then looped them together with some braided hose and clamps. Ive now cut my power steering line and I'm going to buy some braided line and clamps tomorrow. I just want to know how much braided line I would need? Considering I just saw off over 2metres of power steering line wont that 2metres need to be replaced? Or can I just use say 20cm of braided line and just loop them together? Thanks.

 

[solidviper89]

You must be logged in to view this image or video.

I'm guessing you mean that you want to loop the lines back into the PS pump?

 

[knochgoon24]

Unless you autocross your car or frequently turn from left stop to right stop, you can just loop the lines with a short piece.