Pedal issue on high RPM quatermaster

[awdmonster1904]

Hello Dsmtuners well I need some second opinions


recently installed a quarter master 7.25 v drive clutch

New clutch
new fork shaved by shep racing
OEM trowbering
new Shep racing Pedal for 1g
new slave OEM
Rebuilt OEM master
Adjusted according to jacks transmission video NO DRAG

Everything seems to be working accordingly ... but when i drive hard (doing pulls ) The Clutch pedal STAYS ON THE FLOOR ... So I would have to pull it back up

To my experience this kind of issue looks to be hydrolic its strange to me that it only does it on high rps shifting

could it still have air in the system on the slave it self? ??? I did bleed the system

I'm going to re-bleed the system a different way

Using a socket to push the piston down on the slave and removing the slave from the trans and bleeding it that way . Just in case if there any air on the slave it self

My question is ......

Has anyone experienced this issue using a twin plate?

Does my bleeding method make sense?

I'm I missing any other variables ?


Thanks in Advance