Pont
Probationary Member
- 2
- 0
- Aug 7, 2006
-
Grants Pass,
Oregon
97 Eclipse GS-T Spyder: PART NEEDED !!!
There are 3 wires with a plastic connector that attaches to the back side of the cylinder lock on my driver side door. (I'm sure the passenger side has the same setup). It activates and deactivates the factory alarm. One of the tabs that holds this connector securely to the back of the lock, has broke and it will no longer stay attached, making the alarm go off when I unlock my car. The only way around this problem is to unlock the passenger door first.
So, is there anyone out there that is parting out one of these cars that would be willing to sell me this wire with a good connector?
Thanks in advance for your speedy replies,
Rob
Some people have requested pics so I took a few today.
The part consists of 3 wires in a black loom that is about 6-8 inches long. It plugs into a white connector mounted inside the door (close to the door handle). As seen in the pics, the wires at the connector are Green, Black & Red. Where they attach to the white connector, the wires turn into Green/White, Black & Green/Yellow.
I hope these pics help clarify and if anyone has something like this, please let me know.
Rob
There are 3 wires with a plastic connector that attaches to the back side of the cylinder lock on my driver side door. (I'm sure the passenger side has the same setup). It activates and deactivates the factory alarm. One of the tabs that holds this connector securely to the back of the lock, has broke and it will no longer stay attached, making the alarm go off when I unlock my car. The only way around this problem is to unlock the passenger door first.
So, is there anyone out there that is parting out one of these cars that would be willing to sell me this wire with a good connector?
Thanks in advance for your speedy replies,
Rob
Some people have requested pics so I took a few today.
The part consists of 3 wires in a black loom that is about 6-8 inches long. It plugs into a white connector mounted inside the door (close to the door handle). As seen in the pics, the wires at the connector are Green, Black & Red. Where they attach to the white connector, the wires turn into Green/White, Black & Green/Yellow.
I hope these pics help clarify and if anyone has something like this, please let me know.
Rob
Attachments
You must be registered for see attachments list